SJ Series Single Screw Extruder
Application
It is used to extrude thermoplastic plastics such as soft or hard polyvinyl chloride and polyethylene. Equipped the corresponding auxiliary machine including moulding head section, it can process various plastic products such as membrane pipe, board and so on, and it also can be used to granulation.
With advantages of advanced design, high yield, good moulding and low energy-consumption, it adopts the drive of involute gear with low noise, steady operation, large bearing capacity and long longevity.
Main Technical Parameter
| Product
Name |
Major
Axis Ratio |
Output |
Screw
Rotate Speed |
Drive
Powder |
Center
Height |
| SJ-30/25Extruder |
25:1 |
1.5-10kg/h |
15-150rpm |
5.5kW |
1000mm |
| SJ-45/25Extruder |
25:1 |
5-38kg/h |
12-88rpm |
7.5kW |
1000mm |
| SJ-65/25Extruder |
25:1 |
20-85kg/h |
13-130rpm |
22/7.3kW |
1000mm |
| SJ-65/28Extruder |
28:1 |
30-100kg/h |
13-130rpm |
30kW |
1000mm |
| SJ-65/30Extruder |
30:1 |
50-120kg/h |
13-150rpm |
37kW |
1000mm |
| SJ-90/25Extruder |
25:1 |
50-100kg/h |
33.3-100rpm |
55/18.3kW |
1000mm |
| SJ-90/30Extruder |
30:1 |
100-180kg/h |
33.3-100rpm |
55kW |
1000mm |
| SJ-120/25Extruder |
25:1 |
84-190kg/h |
17-52rpm |
55kW |
1000mm |
| SJ-120/30Extruder |
30:1 |
200-300kg/h |
17-52rpm |
75kW |
1000mm |
| SJ-150/25Extruder |
25:1 |
50-300kg/h |
7-42rpm |
100/75kW |
1000mm |
| SJ-200/25Extruder |
25:1 |
180-430kg/h |
5-15rpm |
100/16.7kW |
1000mm |
กก
